Teng 3/8In Dr. Torque Wrench 5-25Nm / 4-18Ft/Lb | Torque Wrenches - 3/8 Inch Drive G-Clamps - 1/8” to 29/32 Wire/Cable

- 1/8” to 29/32 Wire/Cable Size

- Bending & Shaping Metal **12 Month Warranty on Handle ONLY** If used under normal conditions mis-use and abuse is not covered

50mm Depth Metric ‘Silver Series’ Annular Cutters Brand: HOLEMAKER Part Number: AS4550 Hole Diameter: 45mm Depth of Cut (DOC): 50mm Pilot Pin Diameter: 6

CBP65 - 6mm Head 6

Teng Ring Spanner 9 x 12mm - 10mm

Teng 3/8In Dr. Torque Wrench 5-25Nm / 4-18Ft/Lb | Torque Wrenches - 3/8 Inch Drive G-Clamps - 1/8” to 29/32 Wire/Cable3892AG E1 3 8in DriveTorque Wrench Torque wrench according to DIN3122. With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever but only for right hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft lb. Lockable setting. Accuracy 4%. Supplied with factory calibration certificate. Specification: Range 5 25Nm (4 18 ft lb) Scale 0. 4Nm (0. 4 ft lb)